Environmental Test Chambers
  • Home
  • Blog
  • About
  • Contact
  1. Home
  2. ›
  3. Blog
  4. ›
  5. Chamber types

Chamber types  ·  Post #16

IP Ingress Testing: The Chamber That Reveals Every Weak Seal in Your Design

6 June 2026  ·  IP ingress testing, IEC 60529, IP67

IP Ingress Testing: The Chamber That Reveals Every Weak Seal in Your Design

Article content

Full article coming soon. Subscribe to be notified when this post goes live.

IP ingress testingIEC 60529IP67IP68seal integrity

Continue reading

Chamber types

Thermal Chamber vs. Climatic Chamber: A Spec Sheet Won't Tell You Which One You Need

The specification review happened six months before the chamber arrived. The test plan called for damp heat testing at 93% RH. The chamber was a thermal chamber. It had no humidity system.

Chamber types

Walk-In or Reach-In? The Environmental Test Chamber Size Decision Engineers Get Wrong

The walk-in chamber was installed on a Thursday. It was 4.2 metres wide, 3 metres deep, required three-phase power and a floor reinforcement pour. The product it was bought to test was 600mm long.

Chamber types

Salt Spray Chambers: What the Test Measures and What It Doesn't Tell You About Corrosion

A product passed 1000 hours of salt spray to ASTM B117. Eight months later it was corroding in a coastal installation in Portugal. The test had been run correctly. The product had passed. And it corroded.

© 2026 Environmental Test Chambers — The Engineer's Reference

  • Blog
  • About
  • Contact